CADDX NX-6 Manual de instalación descargar pdf (Pagina 60)

GE Security

LOCATION 58 - TAMPER COMMUNICATOR CODE, SLOW SPEED FORMATS (8 segments,

numerical data)

Location 58 contains the event code for a zone “Tamper” with a 4+2 and 3+1 format. For

a 4+2 format, the digit programmed in this location will be sent as the tens digit. As ones

digit, the zone number (1-F) will be reported (e.g. zone 16 = 1, zone 10 = A).

Any segment left as “0” will follow the segment 1 selection.

Segments 1-2 contain the tamper code per bank of 15 zones.

Segments 3-8 are reserved.

To report a restore, the restore code of location 56 will be used.

Segment 1

Zones 1-15, “Tamper Code”

Segment 2

Zone 16 “Tamper Code”

Segment 3-8

Reserved

LOCATION 59 - TROUBLE COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (8 segments,

numerical data)

Location 59 contains the event code for a zone “Trouble” with a 4+2 and 3+1 format. For

the 4+2 format, the digit programmed in this location will be sent as the tens digit. As

ones digit, the zone number (1-F) will be reported (e.g. zone 16 = 1, zone 10 = A).

Any segment left as “0” will follow segment 1 selection.

Segments 1-2 contain the trouble code per bank of 15 zones.

Segments 3-8 are reserved.

To report a restore, the restore code of location 56 will be used.

Segment 1

Zones 1-15, “Trouble Code”

Segment 2

Zone 16 “Trouble Code”

Segment 3-8

Reserved

NX-6-EUR Installation manual Page 60 23/12/04

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 103 104

Sin comentarios

CADDX NX-6 Manual de instalación Pagina 60