CADDX NX-6 Manual de instalación descargar pdf (Pagina 58)

GE Security

LOCATION 54 - DAYS OF THE WEEK “ARM ONLY AFTER CLOSE WINDOW” CODES FUNCTION IN

PARTITIONS 1 AND 2 (2 Segments, feature selection data)

Location 54 selects the days of the week on which each partition is open. On these days,

“arm only after close window” codes will be able to arm and disarm during “open window”.

On days not selected here, “arm only after close window” codes will not disarm (see

locations 52 and 53 for the opening and closing times for the open days).

Segment 1-2

1 = “Arm only after close window” will arm/disarm on Sunday

2 = “Arm only after close window” will arm/disarm on Monday

3 = “Arm only after close window” will arm/disarm on Tuesday

4 = “Arm only after close window” will arm/disarm on Wednesday

5 = “Arm only after close window” will arm/disarm on Thursday

6 = “Arm only after close window” will arm/disarm on Friday

7 = “Arm only after close window” will arm/disarm on Saturday

8 = Reserved

LOCATION 55 - DAYS OF THE WEEK FOR AUTO ARMING IN PARTITIONS 1 AND 2 (2 Segments,

feature selection data)

Location 55 selects the days on which each partition will auto-arm. Segment 1 is for

partition 1, and segment 2 is for partition 2. If a zone is faulted before the warning timer

and stays faulted during the warning timer, the zone will automatically be bypassed. If the

zone restores, it will be unbypassed and active in the system.

Segment 1-2

1 = Auto arming on Sunday

2 = Auto arming on Monday

3 = Auto arming on Tuesday

4 = Auto arming on Wednesday

5 = Auto arming on Thursday

6 = Auto arming on Friday

7 = Auto arming on Saturday

8 = Disable retry timer

NX-6-EUR Installation manual Page 58 23/12/04

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 103 104

Sin comentarios

CADDX NX-6 Manual de instalación Pagina 58