CADDX NX-6 Manual de instalación descargar pdf (Pagina 59)

GE Security

Communicator codes for slow speed formats only

LOCATIONS 56-83 ARE ONLY USED WHEN REPORTING EVENTS TO A PAGER, OR

WHEN USING A SLOW FORMAT SUCH AS 4+2. WHEN USING CONTACT ID OR SIA,

THERE IS NO NEED TO PROGRAM THESE LOCATIONS.

LOCATION 56 - RESTORE COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (2 segments,

numerical data)

Location 56 contains the event code for any zone “Alarm” and “Restore” for a 4+2 and

3+1 format. For a 4+2 format, the digit programmed in this location will be sent as the

tens digit of the alarm event code. As ones digit, the zone number (1-F) will be reported

(e.g. zone 16 = 1, zone 10 = A).

This location contains 8 segments. Any segment left as “0” will follow the segment 1

selection.

Segments 1-2 contain the alarm code for zone 1 to 16.

Segments 5-6 contain the restore code for zone 1 to 16.

Segment 1

Zones 1-15, “Alarm Code”

Segment 2

Zone 16, “Alarm Code”

Segment 3

Reserved

Segment 4

Reserved

Segment 5

Zones 1-15, “Restore Code”

Segment 6

Zone 16, “Restore Code”

Segment 7

Reserved

Segment 8

Reserved

LOCATION 57 - BYPASS COMMUNICATOR CODE, SLOW SPEED FORMATS ONLY (8 segments,

numerical data)

Location 57 contains the event code for a zone “Bypass” with a 4+2 and 3+1 format. For

a 4+2 format, the digit programmed in this location will be sent as the tens digit. As ones

digit, the zone number (1-F) will be reported (e.g. zone 16 = 1, zone 10 = A).

This location contains 8 segments. Any segment left as “0” will follow the segment 1

selection.

Segments 1-2 contain the bypass code per bank of 15 zones. Segments 3-8 are

reserved.

When unbypassing a zone, the restore code of location 56 will be used.

Segment 1

Zones 1-15, “Bypass Code”

Segment 2

Zone 16 “Bypass Code”

Segment 3-8

Reserved

NX-6-EUR Installation manual Page 59 23/12/04

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 103 104

Comentarios a estos manuales

Sin comentarios

CADDX NX-6 Manual de instalación Pagina 59

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad CADDX NX-6