CADDX NX-6 Manual de instalación descargar pdf (Pagina 15)

GE Security

[*]-[9]-[4] SET KEYPAD NUMBER AND PARTITION

1. Enter [*]-[9]-[4]-[program code]- the “Service” LED and the “Instant” LED will flash.

2. Enter the keypad number (1-8).

3. Press [*]- the “Instant” LED will illuminate steadily, and the “Service” LED will carry

on flashing.

4. Enter the partition number for the keypad. The keypad will automatically exit this

mode now).

[*]-[9]-[5] SET ELAPSED INCREMENTS (HOURS/DAYS) SINCE LAST AUTOTEST

1. Enter [*]-[9]-[5]-[program code]- the “Service” LED will flash.

2. Enter [100's digit] -[10's digit]-[1's digit]-[#].

[*]-[9]-[6] SET SYSTEM DATE

1. Enter [*]-[9]-[6]- the “Service” LED will flash.

2. Enter [master code]-[day of week (1=Sun)]-[month 10's digit]-[month 1's digit]-[day

10's digit].

3. [day 1's digit]-[year 10's digit]-[year 1's digit].

[*]-[9]-[7] SET SYSTEM CLOCK

1. Enter [*]-[9]-[7]- the “Service” LED will flash.

2. Enter [master code]-[hour 10's digit]-[hour 1's digit]-[minutes 10's digit]-[minutes 1's

digit].

Note: the clock is a 24-hour clock.

[*]-[9]-[8] INITIATE CALLBACK

Pressing [*]-[9]-[8] while the system is disarmed will cause the control panel to perform a

callback for a download.

NOTE: A VALID USER CODE MAY BE REQUIRED AFTER [*]-[9]-[8], IF ENABLED IN

LOCATION 41.

[*]-[9]-[9] ANSWER DOWNLOAD

Pressing [*]-[9]-[9] while the system is disarmed will cause the control panel to seize the

phone line for a download.

NOTE: A VALID USER CODE MAY BE REQUIRED AFTER [*]-[9]-[9], IF ENABLED IN

LOCATION 41.

NX-6-EUR Installation manual Page 15 23/12/04

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 103 104

Sin comentarios

CADDX NX-6 Manual de instalación Pagina 15