CADDX NX-6 Manual de instalación descargar pdf (Pagina 19)

GE Security

[*]-[9]-[3] SET KEYPAD OPTIONS

1. Enter [*]-[9]-[3] The LCD screen will prompt for a code.

2. Enter [program code]

The LCD will now prompt you through the options

listed in the following chart. The current state of the

option will be shown in the lower right corner of the

display. Press [*] to exit the current state without

any changes. Otherwise, follow the directions on

the bottom line to select the desired option. When

finished, press [*] to move to the next option.

OPT KEYPAD FEATURES

CASE TAMPER ON?

Tamper switch of keypad housing active

SILENT KEYPAD?

Enable silent keypad option. If this is on, silent keypad is enabled for

entry/exit delay and chime.

DING-DONG CHIME?

Enable ding-dong sound for chime. If this is off, the chime will be a single

tone.

5 SEC. SILENCE?

Enable keypress silence option. Silences the pulsing keypad sounder for 5

seconds when a key is pressed.

ARMED ZONE INFO?

Enable armed status suppression. If this is on, the keypad will not display

faulted or bypassed zones when the system is armed.

BEEP ON PANICS?

Enable panic, fire, medical beep tone. Will sound a short beep to verify that

the keypress has been accepted.

DISABLE SERVICE?

Suppresses the “Service” Message. This will not allow the “Service”

message to be displayed for any reason. If there is a system malfunction

(trouble), pressing [*]-[2] will still display the “Service” menu.

MASTER KEYPAD?

Enable multi-partition mode.

CUSTOM MESSAGE?

Enable custom message display.

CLOCK?

Enable clock display.

CUSTOM MSG. LOCK?

Enable custom message lock. Prevents the custom message from being

overwritten during keypad copy.

SELECT AN OPTION

1234 - - - -

NX-6-EUR Installation manual Page 19 23/12/04

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 103 104

Comentarios a estos manuales

Sin comentarios

CADDX NX-6 Manual de instalación Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad CADDX NX-6