CADDX NX8EUA01 Manual de usuario Pagina 4

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 18
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 3
4
GLOSSARY OF TERMS
Abort Delay
: An option that allows a delay in reporting to the central station.
Authority Level
: The level of access an individual has when using an alarm
panel.
Central Station:
Location where alarm data is sent during an alarm report
.
Chime Feature:
An option that allows the keypad to sound a ding-dong
whenever an entry/exit door is opened.
Codes:
Can be either User Codes (relating to a person) or Function Codes (a
toggle switch to turn specific functions on/off). NOTE: A system may have either
99 four (4) digit codes or 66 six (6) digit codes, but not a mixture of the two.
Duress Code:
An option that allows a special code to be sent to the central
station that indicates the alarm system is being operated under duress.
Forced Arming:
An option that allows the system to be turned on (ARMED) with
one or more zones open. A system that is ready to be force armed will flash the
ready light
. (Note: Those zones that are not ready will not create an alarm.)
Function Code:
A Function Code is either a four (4) or six (6) digit code that has
been programmed by the installer to operate a device.
Group Bypass:
An option that allows the user to bypass multiple zones with a
single operation.
Instant/Delay:
An option that allows an instant alarm condition for Entry/Exit
doors, or grants a delay to allow someone to enter/exit the building without an
alarm, or before entering a user code to disarm.
Master Code:
A master arm/disarm code that can program other user codes.
Partitioned System:
A system divided into multiple areas in which its own user
or users control each area.
Perimeter:
The outer edge of the protected area.
Quick Arm:
An option that allows you to turn on (ARM) the security system by
pressing either the [
STAY
] or [
EXIT
] key on the keypad control (for ARMING
only) as programmed by the installing company.
User Code:
A four (4) or six (6) digit entry used to arm or disarm the system.
Vista de pagina 3
1 2 3 4 5 6 7 8 9 ... 17 18

Comentarios a estos manuales

Sin comentarios