15
SERVICE MENU
The
service light
will be “on” if the security system requires service. If the
service
light
is “on”, press the [
7
] key followed by the [
2
] key to determine the service
condition. One or more zone lights will illuminate indicating what service(s) is
required. Call your service provider immediately for these problems. Below is a
listing of what each light means in a service condition.
LIGHT
PROBLEM
SYSTEM FAULT -
Press the [
1
] key. The
zone light(s)
that is
illuminated corresponds to the system fault(s) below:
1
Over Current Fault
2
Siren Trouble
3
Box Tamper
4
Expander Power
5
Expander Low Battery
6
Expander Box Tamper
7
Expander Trouble
8
Ground Fault
1
Note: Faults 1 & 2 are global in nature and will affect all
partitions of a multi-partition system
. Press the [
#
] key to return
to the 1 of 8
service lights
.
2 ZONE TAMPER -
Press the [
2
] key and the
zone light(s)
will illuminate
showing the zone(s) that are tampered. Press the [
#
] key to return to
the 1 of 8
service lights
.
3 ZONE LOW BATTERY -
Press the [
3
] key. The
zone light(s)
will
illuminate showing which zone(s) has a low battery. This only
applies to wireless zones. Press the [
#
] key to return to the 1 of 8
service lights
.
4 ZONE LOSS OF SUPERVISION -
Press the [
4
] key and the
zone
light(s)
will illuminate showing which zone(s) has loss of supervision.
This only applies to wireless zones. Press [
#
] key to return to the 1
of 8
service lights
.
5 ZONE TROUBLE -
Press the [
5
] key and the
zone light(s)
will
illuminate showing which zone(s) has a trouble condition. Press the
[
#
] key to return to the 1 of 8
service lights
.
6 TELEPHONE LINE TROUBLE/LINE CUT -
This light will illuminate
when there is telephone line trouble or the telephone line has been
cut. Press the [
6
] key. If LED 6 illuminates, the telephone line has
the trouble. If LED 7 illuminates, the cellular device has the trouble.
The
service light
will remain lit until the telephone trouble clears and
a user code is entered.
Note: This fault is global in nature and
will affect all partitions of a multi-partition system.
7 FAILURE TO COMMUNICATE -
This light will illuminate when there is
a failure to communicate between your system and the central
station.
Note: This fault is global in nature and will affect all
partitions of a multi-partition system.
8 LOSS OF SYSTEM TIME
- This light will illuminate when there has
been a loss of power and your system clock needs to be reset.
Instructions are on page 13.
Note: This fault is global in nature
and will affect all partitions of a multi-partition system
.
To exit the Service Light Mode - press the [#] key.
(10 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales