CADDX NX-6 Manual de instalación descargar pdf (Pagina 73)

Appendix B: Reporting codes

NX-6V2 Control Panel Installation Manual 69

Loc.

Description

Default

Setting

3 = Aux output to stop timing upon user code

entry

4 = Aux output activates only betw een closing and

opening time

5 = Aux output activates only betw een opening and

closing time

6 = Invert aux output (0 V going to 12 V w hen

activated)

Auxiliary output 1 event/times

Segment 1 = Event number for output 1

0 (burglary alarm)

Segment 2 = Timing for output 1

10 (seconds)

Auxiliary output 2 event/times

Segment 1 = Event number for output 2

1 (fire alarm)

Segment 2 = Timing for output 2

10 (seconds)

Auxiliary output 3 event/times

Segment 1 = Event number for output 3

2 (24-hour alarm)

Segment 2 = Timing for output 3

10 (seconds)

Auxiliary output 4 event/times

Segment 1 = Event number for output 4

39 (smoke pow er)

Segment 2 = Timing for output 4

0 (follow condition)

Autotest control

Segment 1 = Autotest interval

0 = Days

1 = Hours

2 = Days and suppresses the test if any report has

been sent w ithin the last interval

3 = Hours and suppresses the test if any report has

been sent w ithin the last interval

Segment 2 = Autotest interval from 1 to 255 days or

hours based on Segment 1

24 (hours)

Segment 3 = Hour of the autotest in 24-hour time

format

2 (0200)

Segment 4 = Autotest report time, min. after the hour.

Opening/automatic disarm times

Segment 1 = Hour of the opening time

Segment 2 = Minutes after the opening time

Closing/automatic arming times

Segment 1 = Hour of the closing/auto arming time

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 86 87

Comentarios a estos manuales

Sin comentarios

CADDX NX-6 Manual de instalación Pagina 73

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad CADDX NX-6