CADDX NX-8e Especificaciones descargar pdf (Pagina 53)

NX-8E CONTROL

LOC PG DESCRIPTION DEFAULT DATA

Segment #2 (Circle numbers to program) 43 24

Enables "Go To Program Code" for partition #1.

Enables "Go To Program Code" for partition #2.

Enables "Go To Program Code" for partition #3.

Enables "Go To Program Code" for partition #4.

Enables "Go To Program Code" for partition #5.

Enables "Go To Program Code" for partition #6.

Enables "Go To Program Code" for partition #7.

Enables "Go To Program Code" for partition #8.

44 24 DURESS CODE

15-15-15-15-15-15

_ _ _ _ _ _

AUXILIARY OUTPUTS 1-4 PARTITION SELECTION

Segments 1 2 3 4

45 24

Partition #1

Partition #2

Partition #3

Partition #4

Partition #5

Partition #6

Partition #7

Partition #8

46 24 AUXILIARY OUTPUTS 1-4 SPECIAL TIMING

Segments 1 2 3 4

Auxiliary output timed in minutes.

Auxiliary output to latch.

Auxiliary output to stop timing upon user code entry.

Auxiliary output to activate only between closing and opening time.

Auxiliary output to activate only between opening and closing time.

Invert auxiliary output (0 volts going to 12 volts when activated).

Reserved

AUXILIARY OUTPUT #1, EVENT & TIME

Segment #1: Program the event number for output #1 here. 0=Burglary alarm

Segment #2: Program the timing for output #1 here. 10 seconds

AUXILIARY OUTPUT #2, EVENT & TIME

Segment #1: Program the event number for output #2 here. 1=Fire alarm

48 25

Segment #2: Program the timing for output #2 here. 10 seconds

AUXILIARY OUTPUT #3, EVENT & TIME

Segment #1: Program the event number for output #3 here. 2= 24 Hour Alarm

49 25

Segment #2: Program the timing for output #3 here. 10 seconds

AUXILIARY OUTPUT #4, EVENT & TIME

Segment #1: Program the event number for output #4 here. 21-Armed State

50 25

Segment #2: Program the timing for output #4 here. 0=Follow condition

AUTOTEST CONTROL

Segment #1: Program a "1" if the interval is hours, a "0" if in

days. Add a A2" to suppress the daily test or a A3" to suppress

the hourly test.

Segment #2: Program the autotest interval from 1-255 days or

hours.

Segment #3: Program the autotest report in 24-hour time

format.

Segment #4: Program the autotest report time, minutes after

the hour.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 79 80

Comentarios a estos manuales

Sin comentarios

CADDX NX-8e Especificaciones Pagina 53

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad CADDX NX-8e